Setup Linksys Wi-Fi extender

In this Article we discuss about Setup of Linksys Wi-Fi extenderLinksys. So,Wi-Fi Extender is unyielding Wi-Fi for all home appliances. Here, we will learn how to setup Linksys Extender. To configure the Linksys extender, the very first step you need to access the setup page of Extender Linksys. But first, you need to know that Extender.linksys.com or Extender.linksys.setup is offline pages and cannot be accessed in the online form. The default URL for the setup of Linksys extender is www.Extenderlinksyssetup.com. Once you connect to the extender correctly it will suggest you reach the setup page. After that start with the configuring process of Wi-Fi extender.

Steps for to Setup Linksys Wi-Fi extender

  • Plug your Linksys Extender to the working power socket.
  • Open any updated browser in your system that is a computer, mobile phone etc. and enter the default address of Linksys Wi-Fi extender in the address bar.
  • In case you don’t reach the Linksys setup page then switch your browser.
  • Select one option amongst Hit range extender or access point as per your requirement. 
  • Sometimes you will find that Extender.linksys.com page turns off but nothing to worry you only need to refresh the browser.
  • Follow the step by step information on the page and complete the Linksys Extender setup process.
  • Once the setup process finished then the Extender.linksys.com or extender.linksys.setup page will terminate automatically.
  • With the help of spot finder, you will get supreme signal strength and fast internet.
Setup Linksys Wi-Fi extender
Setup Linksys Wi-Fi extender

How to open Extender Linksys Setup Page?

With the help of any WPS compatible router or with Linksys extender setup offline page you can do the Linksys Extender setup. 

Steps are as follows:

  1. You need to figure out the WPS button which is usually at the back of the router. (Depends on the type of router)
  2. Press the WPS button at least for 2 minutes until the WPS light gets bright.
  3. WPS light solid means the connection between the router and the Linksys extender is complete.

How to setup Linksys Extender as an access point?

First, we need to know something about the access point. Basically, it is a process under which Linksys Extender setup as a router. In simple words, we can set up multiple Linksys Extenders on this.

  • Initial you need to check out the slider button on the Wi-Fi range extender, either it is on the side marked as an extender or towards the side marked as an access point.
  • We are doing the setup as an access point so it is obligatory to be towards an access point side.
  • Connect your Linksys extender to router’s Lan port via hardwire.
  • Login to your Linksys extender setup page and you can do it in two ways. First, by typing default IP address or you can type Linksys Extender setup in your browser.
  • Now just follow the step by step procedure and by doing so your extender will be set up as Linksys setup access point.

 NoteOne can connect the number of Linksys Extender on a single router or network.

Step-by-Step Guide for Linksys Extender Setup RE7000

Linksys RE6700 setup

Are you struggling with your no WiFi in some corners of your house or workplace? Irked with weak WiFi signals? So, now it’s time to extend and boost your home WiFi router signal to almost every hard-to-reach location such as backyard or garage with the help of Linksys RE7000 Max-Stream AC1900+ WiFi extender. A handy Linksys extender setup RE7000 allows your smart devices to connect to the Internet.

So, without wasting time on chewing long fats, let’s move a step forward to set up Linksys extender.

Requirements for Linksys Extender Setup RE7000 Steps

Before proceeding for the Linksys RE7000 setup, you should have the following:

  • Live internet connection
  • An ethernet cable
  • Router’s wireless credentials
  • And, of course, Linksys RE7000 extender (Words of Nerd!)

Two Handy Linksys WiFi Extender Setup RE7000 Methods

Isn’t that good news! There are two easy methods for Linksys extender setup RE7000. You can configure your Linksys extender via a wireless protected setup (WPS) button or manual setup. Now, it’s all up to your requirements and ease of which method you prefer.

Don’t worry, folks! Here on this page, we discuss both Linksys extender setup methods.

Linksys RE7000 Setup: WPS Method

The WPS, aka wireless protected setup method, is best for the tech newbie. No hard work. Just press a tiny button, and the work is done. Let’s see how!

  1. Unbox your Linksys AC1900 RE7000 extender carefully.
  2. Place your WiFi range extender near to your home wireless router. Ensure that the distance between both the devices does not exceed 1-3 feet during the Linksys range extender setup.
  3. Now, plug-in your Linksys RE7000 to an electric power socket and turn it on.
  4. Wait for a few minutes, let the Linksys extender boots up. The power LED turns from orange to green.
  5. Turn on your home WiFi router.
  6. Locate the WPS button on the WiFi RE7000 extender and press it.
  7. Again wait for a few minutes until the WPS LED turns into solid green.
  8. Unplug the WiFi extender and place it to a new location.
  9. Plug it back into an electric power outlet and turn it on.
  10. Try to connect your desktop or laptop to the Linksys extender setup-xxx network.
  11. Run any web browser and ping google.com to test the Internet connection.

Manual Linksys Extender Setup RE7000 Steps

Do the above-mentioned Linksys RE7000 setup steps not work? Don’t be fret! Consider the below-mentioned steps to set up your Linksys RE7000 AC1900 WiFi range extender.

  1. Unbox your Linksys AC1900 RE7000 extender carefully.
  2. Place your WiFi range extender near to your home wireless router. Ensure that the distance between both the devices does not exceed 1-3 feet during the Linksys range extender setup.
  3. Connect your Linksys extender to the router via an Ethernet cable.
  4. And now, plug-in your Linksys RE7000 to an electric power socket and turn it on.
  5. Wait for a few minutes, let the Linksys extender boots up. The power LED turns from orange to green.
  6. Then, Turn on your home WiFi router and computer.
  7. Run any of your preferred web browsers.
  8. Visit extender linksys setup web page.
  9. You land on the Linksys RE7000 setup login web page.
  10. Fill the default WiFi extender login credentials.
  11. Click on the ‘Log In’ or ‘Sign In’ button.
  12. The web browser prompts you to the Linksys RE7000 admin panel interface.
  13. Now, follow the on-screen instructions to configure your Linksys AC1900 extender as per your requirements.
  14. Click on the ‘Save’ button, once all the steps are completed.
  15. Unplug the WiFi extender and place it to a new location.
  16. Plug it back into an electric power outlet and turn it on.
  17. Try to connect your desktop or laptop to the WiFi extender.
  18. Run any web browser and ping google.com to test the Internet connection.

Bonus Tip: Somehow, if you face any difficulty in running the extender linksys setup web page, then replace it with the Linksys extender default IP address.

So, these are the two genuine methods to set up Linksys RE7000 Max-Stream AC1900+ WiFi extender. Somehow, if you struggle somewhere while configuring the device? Then, get in touch with us.