Linksys Extender Setup

Connecting a WPS Enabled Device using WPS Button

Linksys Extender Setup using WPS. The WPS button allows you to attach the WPS-enabled devices easily with the WIFI devices. Now WPS button easily either at the rear side of the WIFI extender otherwise you also can look for the WPS button on the front side.

Linksys extender setup for connecting a WPS-enabled device is basically very easy. Select the WPS-enabled setup. After the 2 minutes, you’ll got to press the WPS button located at the device.

You can use this method if you already has the WPS PIN.
Access the Linksys extender setup ac1200 page using the IP address 192.168.1.1 and fill the login details. If you are not log in, contact our router experts for help.
Go for the “Wireless” option then select the “WIFI Protected Setup” option.

At next step, you’ll need live remote access services. Our support team is all able to serve you with the simplest router login support solutions. you’ll also find the forum option where you’ll invite your queries or also can find the solutions on “frequently asked question” field.

Linksys Extender setup using WPS

To connect your Linksys extender to your router using WPS, follow the steps below:

1. Place your Linksys extender near your router and plug it into an electrical outlet.
2. Press and hold the WPS button on your router for 2-3 seconds until the WPS LED starts blinking.
3. Within 2 minutes, press and hold the WPS button on your Linksys extender until the WPS LED on it starts blinking.
4. Wait for the WPS LED on the extender to stop blinking and remain lit, indicating that the extender has successfully connected to the router.
5. Move the extender to the desired location and plug it into an electrical outlet.
6. Wait for the Power and Wi-Fi LED lights on the extender to turn solid green, indicating a successful connection.

If your router does not have a WPS button, you can still connect your Linksys extender to it using the web-based setup page. To do this, you will need to connect your computer or mobile device to the extender’s network and then access the web-based setup page using a browser. From there, you can follow the on-screen instructions to connect the extender to your router.