How to Setup Multiple Linksys Extenders on a single Router/Network?

Multiple Linksys Extender Setup

There is no limit on the number of Linksys extenders that can be Setup on a single Network. We can Setup multiple Linksys Extender on a single Router or Network. In this article, we will learn multiple Linksys extender Setup.
But before that, there are some precautions that you need to take care of while setting up extenders. The reason for precaution is IP confliction. For instance, if you Setup 5 Linksys Extenders on a single network with the same SSID it will cause IP confliction. Which in its extreme stage results in DNS issues. So to avoid that follow these manual steps.

Setup Multiple Linksys Extender on single Access Point or Router
Multiple Linksys Extender Setup

Steps involved in Setup multiple Linksys Extenders are:-

1) Firstly, We will have to Configure the first Linksys Extender and will make sure that all the other Range Extenders are unplugged at that moment.

2) We can Setup Linksys Extender through extender.linksys.setup or extender.linksys.com or can type 192.168.1.1 in the address bar.


Note: (Click here to see how to set up extender )


2) Once the first Linksys Extender is configured properly unplug it and plug in the second one, now complete the setup process for this one too and once it is configured to unplug this one also and repeat the process until every Linksys Range Extender is Setup.

Note:- The trick to configure all the extenders is that we have to name each Linksys Extender with different SSID to avoid IP conflictions. You will get the option to change the name of the extender during the installation process.


3) Lastly, when the Installation of the very last Linksys extender is also complete, then place them to the location of your need.

Summary

Leave a Comment

Your email address will not be published. Required fields are marked *