Setup Linksys Wi-Fi extender

In this Article we discuss about Setup of Linksys Wi-Fi extenderLinksys. So,Wi-Fi Extender is unyielding Wi-Fi for all home appliances. Here, we will learn how to setup Linksys Extender. To configure the Linksys extender, the very first step you need to access the setup page of Extender Linksys. But first, you need to know that or Extender.linksys.setup is offline pages and cannot be accessed in the online form. The default URL for the setup of Linksys extender is Once you connect to the extender correctly it will suggest you reach the setup page. After that start with the configuring process of Wi-Fi extender.

Steps for to Setup Linksys Wi-Fi extender

  • Plug your Linksys Extender to the working power socket.
  • Open any updated browser in your system that is a computer, mobile phone etc. and enter the default address of Linksys Wi-Fi extender in the address bar.
  • In case you don’t reach the Linksys setup page then switch your browser.
  • Select one option amongst Hit range extender or access point as per your requirement. 
  • Sometimes you will find that page turns off but nothing to worry you only need to refresh the browser.
  • Follow the step by step information on the page and complete the Linksys Extender setup process.
  • Once the setup process finished then the or extender.linksys.setup page will terminate automatically.
  • With the help of spot finder, you will get supreme signal strength and fast internet.
Setup Linksys Wi-Fi extender
Setup Linksys Wi-Fi extender

How to open Extender Linksys Setup Page?

With the help of any WPS compatible router or with Linksys extender setup offline page you can do the Linksys Extender setup. 

Steps are as follows:

  1. You need to figure out the WPS button which is usually at the back of the router. (Depends on the type of router)
  2. Press the WPS button at least for 2 minutes until the WPS light gets bright.
  3. WPS light solid means the connection between the router and the Linksys extender is complete.

How to setup Linksys Extender as an access point?

First, we need to know something about the access point. Basically, it is a process under which Linksys Extender setup as a router. In simple words, we can set up multiple Linksys Extenders on this.

  • Initial you need to check out the slider button on the Wi-Fi range extender, either it is on the side marked as an extender or towards the side marked as an access point.
  • We are doing the setup as an access point so it is obligatory to be towards an access point side.
  • Connect your Linksys extender to router’s Lan port via hardwire.
  • Login to your Linksys extender setup page and you can do it in two ways. First, by typing default IP address or you can type Linksys Extender setup in your browser.
  • Now just follow the step by step procedure and by doing so your extender will be set up as Linksys setup access point.

 NoteOne can connect the number of Linksys Extender on a single router or network.

How to Setup Linksys RE1000 Extender?

Linksys Re1000 Extender

Get complete information here on how to setup Linksys Re1000 Extender, which helps to increase the wifi range of your wireless router. This extender is compatible with B and G technology & should work on your current wireless network. It has one ethernet port on the bottom side to allow quick plug and play installation. Moreover once configured you can connect any device with ethernet chord to this Extender for better Internet Connectivity.

Linksys RE1000 is best Range Extender for home or office riddled with an internet dead zones. The small size of this extender makes it easy to plug into a wall outlet. This is a great device, In case your house or office is big enough then you can opt for higher performance Linksys Extenders.

Specifications Of Linksys RE1000 Extender:


• Multiple Antennas Provide Wide coverage area.


• Ethernet speed 10/100 Mbps


• Moreover works great for surfing the web, gaming and chatting online in dead zone areas.


  • Firstly, Plug in the Linksys Extender for its Setup into a power outlet near your router.
  • In order to configure it, we have to make sure that the computer should be connected with an ethernet cable to the Range Extender.
  • Open your web browser (Google, Firefox, Safari) and click on the website / extender.linksys.setup or type IP address “” in the address bar.
  • Now, it will ask you to enter the user name and password in the field.
  • To create wireless security on the WiFi range extender, click on basic wireless settings on the web-based setup page. Now choose your WPA Security mode menu and enter the main wifi password of your router. After that click on the SAVE option. Now you can successfully connect your device to the wifi range extender.
  • Lastly, Green WiFi Led light will indicate the successful configuration of your Linksys extender.
  • Your Linksys Extended Network will show up as ( _EXT) at the end of your main network’s name. For example, if ABC network is your home network then extended network show up as ABCnetwork_EXT.
extender setup RE1000 | Linksys RE1000 Extender Setup



How to remove/forget existing Network while Linksys Extender setup?

Before Linksys Extender Setup delete Your existing Network

First of all, we need to understand the need to Forgot the Network. It has been observed that whenever we configure a new device to our network or whenever we change our Main router we will have to forget the former network names. Here is the complete step by step instruction to delete a wireless network profile.


  • Click the Network icon on the lower right corner of your screen.
  • Now Hit Network settings.
  • Click Manage Wi-Fi settings.
  • Under Manage known networks, click the network you want to delete.
  • Click Forget.

Linksys Extender setup help. if you unable to connect  your Linksys wifi Network with Computer, go through  with this step it will help you


In this version of Windows, It is quite difficult to get used to its functions, whereas in previous windows or in windows 10 it is easy to Delete Network Profile. Windows 8 is a bit puzzled, but you don’t worry we have mentioned the step below for deleting Network Profile In Windows 8

Lets learn how to remove wireless preferred network profiles

IMP: This method will work when the wireless router is within the range of the PC.

  1. Firstly, Open Settings and press the Windows key on the keyboard + i.
  2. Click the Wireless icon then right click the network.
  3. Lastly, Choose Forget this network.


Let’s Follow the steps to remove the existing network profile in windows 7

  • Firstly, Click Start->Control Panel, Select Network, and Internet, and then click Network and Sharing Center
  • In the task list, please choose Manage wireless networks.
  • In the Network table, please select the existing profiles and click Remove.
  • You may see a warning dialog box, just click OK
  • Then please go back to Network and Sharing Center and choose Change adapter settings -> right click Wireless Network Connection -> click Connect/Disconnect.
  • Lastly, Click the refresh button to view available wireless networks. Highlight the network which you want to connect, double click it or click Connect button.

Linksys Extender not showing up in your network?

There can be many reasons why extender not showing up. For instance,

a) It is plugged in far away from the router thats why extender not showing.
b) Your device (mobile, laptop, tv, camera, etc) which you are trying to connect is far.
c) Walls, obstacles blocking away the signal.
d) Setup with the same SSID as your router Click Here to check Router Setup Page.

Follow the following steps when extender doesn’t show in your WiFi list.

  • Firstly, Unplugged the extender and bring it closer to the router.
  • If still, it is not showing up in the wifi list shut down your devices and turn them back again.
  • Try removing/forgetting the known wifi connections.
  • If you have to cover long distances you should opt for hardwire option, you won’t lose any data speed plus you will be able to cover more distance.
  • In this case, you will have to login into your Linksys Extender and then change the SSID from there.
    Note:- don’t change SSID on router otherwise your every device will get disconnected from the router.
extender not showing up

How to Setup Linksys RE6700 Extender?

Understanding Linksys RE6700 Extender Setup

Linksys RE6700 AC1200 extender setup
Extender Linksys Setup RE6700 AC1200

With the AC1200 MAX Wi-Fi Range Extender (RE6700), you can easily expand the range of your existing wireless router. Simply plug the device into a standard wall outlet where you need stronger Internet connectivity. For example, an upstairs bedroom or office or another remote area of your home. It is equally important to understand that RE6700 repeats the signal from the router and redistributes it to reduce wireless dead spots. In short, it doesn’t create its own signal. Let’s start the Linksys RE6700 Extender Setup.

Linksys RE6700 Extender Setup:-

1) Firstly, Plug the Linksys RE6700 Extender to an outlet CLOSE to the modem/router Once you set it up you can move it to the best range extending location.

2) Once it’s plugged in, you have to wait for the flashing light on the front to change color and flash orange.

3) Now that you have an orange blinking light, get on your computer’s WiFi and connect to, the Linksys Extender Setup signal. After your computer connects to the Linksys extender.

4) Open a web browser.

NOTE:-In case the default Linksys Extender Setup name does not show up Try Reset The Linksys Extender.

5) Click here to setup Linksys RE6700 Extender or type in the address bar.

6) Now you’re in the Linksys extender setup application. Just follow the instructions provided. The Linksys extender will find the available networks to join. Similarly, select to join your network from the list of available networks put in your password and Hit NEXT. Moreover, Once the Extender joins your network the software will finally, tell you the installation is complete, as well as the front light of the unit, will turn to solid green.

7) Lastly, you can unplug the Linksys RE6700 extender and move it around your house. Just plug the extender into a wall outlet and the extender now will automatically log onto your network. Now you’re ready to log onto it. The Setup application works really well.

Finally, we got to know that it is a really useful piece of hardware and once you understand what you have to do, installing this extender is really quick and easy.

How to connect Linksys Extender Setup using WPS Method?


Linksys Extender setup using WPS

1) Firstly, make sure that your router is configured and you are able to connect your devices.
2) Now as you plug in the extender to the wall the light blinks green for few seconds and turns amber after that.
3) As soon as the light turns amber push WPS on the router and push the WPS on the extender.

linksys extender setup
Linksys WPS button

Note:- make sure both devices are in the same room or as close as possible.
4) Lastly, On configuration, the light on Extender will turn solid green.
Note:- if by any chance you still have issues or need suggestions to call our technicians on Toll-Free or visit our website http://Extender.linksys.setup or email us for a later appointment at