What lights should be on my Linksys extender?

Table of Contents

In this article we will discuss what lights should be on my Linksys extender? So, here we will provide full description about this.

TP-LINK powerline adapters have three LED lights:

  1. First one stands for power;
  2. Second one stands for powerline connection;
  3. And last third one stands for Ethernet connection.

Briefly Explanation: #

What lights should be on my Linksys extender
What lights should be on my Linksys extender

Power LED:

  • Power led should be on all the time. If it is off, then change a socket to have a try. If still can’t power on, after this arrange to exchange a new one.
  • When it is in the pairing process or in power-save mode, the Power LED will flash. After the process is over, the Power LED will back to steady on.

Powerline LED:

When you have successfully made the powerline connection, the Powerline LED will be on. It will be off when it is in Power-save mode.

Ethernet LED:

In Ethernet Led any device when connected to the Ethernet port and be powered on, the Ethernet LED will be on. It will flash with data transfer. Only when the LED is off more than 5 minutes, it will be in power-save mode.

Wi-Fi LED:

Wi-Fi LED is on or flashing quickly mean wireless connection is enabled. In Wi-Fi cloning procedure, the light will flash slowly.  Press down and hold the Wi-Fi button for at least 5 seconds to turn the wireless function on or off. The wireless function is on by default. You can turn it off at night and then on in the morning by pressing down this button.

Powered by BetterDocs

Leave a Reply

Your email address will not be published. Required fields are marked *