How to check the status of your Linksys range extender?

Most of you are confused that How to check status of Linksys range extender. Also how to check the status of Linksys range extender? Don’t worry we have the best way to solve this issue. Must read the full article it will help you to know the status of your Linksys extender. Just follow these steps carefully and do it exact as mentioned. This method will make you relief from this issue.

How to check the status of your Linksys range extender
check the status of your Linksys range extender

Check Status of Linksys extender #

Follow these beneath steps carefully:

  1. Firstly you need to launch any web browser from your device to log in to the web-based setup page of your range extender.

Note:  Here we have two methods to log in:

  • First is type the link in the address bar “http://extender.linksys.com” and click Enter.
  • Second you can enter the IP address of the range extender.​

CAUTION: In case your range extender is not configured yet, and then its default IP address will be 192.168.1.1. In case your range extender is configured already. Then you need to check the IP address in your router’s DHCP Client table.  .

  • Then in left navigation go to and click to Device info.
    After that go to Network address and click Subnet Mask and Default Gateway.

  • Further, under Network Address, check the Subnet Mask and Default Gateway. 

Note: Every device in network connected to wireless router must have the same first three (3) octets as the Default Gateway, too. 


  • Here in left navigation go to Status and click WLAN Statistics.

  • Finally you need to check the Network Name (SSID) field must be same as your wireless network. After that, check the Status must be Associated.

That’s solve this is the best to resolve this issue. We hope this article helped  you to solve this issue.

Powered by BetterDocs

Leave a Reply

Your email address will not be published. Required fields are marked *